Applied by trowel or spackle knife with the addition of 15% grey builders cement by volume.
For filling defects in the substrate up to 4mm in a single application. Multiple coats of GranoPatch® Smooth may be applied for rectification of severe defects.
GranoPatch® Smooth may also be used to produce a uniform surface from an existing texture finish if a change in substrate appearance is required.
GranoPatch® Smooth may be used as a skim coat over coarse render without the problems of sweating, or shrinkage often encountered (especially in tropical regions) due to the use of plaster or cement-and-lime based compounds.
Due to the hydraulic setting mechanism of GranoPatch® Smooth, moisture is not trapped in deep defects as occurs with less sophisticated single pack compounds.
GranoPatch® Smooth may be sanded to produce a smooth surface suited to the most demanding high gloss finish.
Instructions for Use
Stir contents thoroughly with a power stirrer before use.
GranoPatch® Smooth requires the addition of 15% grey builders cement by volume.
Mix one (1) part water with two (2) parts grey builders cement to form a slurry.
Thoroughly blend one (1) part of the above cement slurry mixture to four (4) parts GranoPatch® Smooth before use. GranoPatch® Smooth has a pot-life of 3 hours when mixed with this grey builders cement slurry.
Fill any cracks, holes or imperfections with GranoPatch® Smooth, allow to dry. Sand back and dust off.