CCS Stain Block is a high performance, silane-based, deep penetrating sealer that provides long term protection to a variety of surfaces.
Containing a high concentration of special fluoro polymers CCS Stain Block not only repels water, but also effectively repels oil and organic based stains. It offers better protection against staining than traditional silicone based penetrating sealers.
The fluro-polymers within CCS Stain Block work to chemically infiltrate the pores of the concrete or stone, to provide excellent resistance to stains.
The result is a surface that is much easier to clean and maintain.
Due to its penetrating nature CCS Stain Block does not change or alter the colour of the surface ensuring the original natural look of the substrate is retained.
Note: A test area must be prepared and allowed to cure for 24 hours to determine the application rate and that the desired effect is achieved.
Allow the sealer to cure for at least 4–6 hours before subjecting to pedestrian traffic and 7 days for vehicular traffic, trolleys, wheel mounted bins or any other equipment that could impact or mark the surface. Please note that whilst the sealer is in the curing phase a slight residue may initially be felt underfoot.
Base | Solvent Based |
---|---|
Finish | Natural |
Coverage (/Coat) | 5 - 8M²/L |
Recommended Wait Time for First Coat | 28 Days |
Recommended Coats | 2+ Coats |
Recoat Time | Wet on wet - do not apply further coats once dried |
Application Method | Low pressure sprayer, microfibre |