Description
Flowfill Grout GP MY is a multi-purpose non-shrink Class-A cementitious grout. It is based on Portland cement, graded aggregate and chemical additives , which impart controlled expansion whilst in the the plastic state. The gaseous expansion system compensates for shrinkage and settlement in the plastic state.
Key Features
- Gaseous expansion system compensates for shrinkage and settlement whilst in the plastic state
- Can be dry packed, rammed, toweled, poured and pumped
- Economical, low in place cost
- Ready to use, premixed, requires only the addition of water
- No metallic iron content to cause staining
- Lower water / cement ratio reduces drying shrinkage, permeability and increases durability
- Excellent flow characteristics, when used in fluid consistency, will fill intricate cavities
- Complete void filling resulting from gaseous expansion in plastic state
Recommended Uses
- All general purpose grouting
- Precast and prestressed panels
- Grouting in column based, base infilling
- Fill core holes, rod holes and defects in concrete
- Fill in grout for hollow block walls
- Joints between precast panels and other joints
- Till slab panels
- Caulking of joints and pipe
Tech Data Sheet
Tech Data Sheet
Safety Data Sheet
Safety Data Sheet