SURFACE-CURE A- WATERBASED CURING COMPOUND is a Class D, Type 1 curing compound for use on new concrete that facilitates maximum moisture retention through 28 days curing period to maximise concrete strength & durability.
SURFACE CURE A can also be generally classed as a Class Z, Type 1 it comes back to interpretation of definitions.
The polymer used is a synthetic acrylic and can fit in both class descriptions.
SURFACE-CURE A, cures, seals, and hardens the surface of new concrete, providing increased strength and durability and improved resistance to chemicals and surface dusting, when applied by the correct method and at the recommended application rate.
The dried film, which is not particularly obvious and has minimal darkening on exposure to sunlight.
SURFACE-CURE A is based on an acrylic resin combined with other additives.
Mainly used on freshly laid concrete floors, carparks, warehouses, bridge ramparts etc.
Also used for curing vertical concrete areas immediately after the stripping of forms to assist strength development, improve chemical resistance, etc.
5m2/L ( 0.2litres/m2 ) using a spray applicator – do not brush.
Code | Item | Pack |
---|---|---|
21625 | Surface Cure A 20L | 20L |
20024 | Surface Cure A 200L | 200L |
20025 | Surface Cure A 1000L | 1000L |
The coating should be applied in a single coat to achieve the required dry film thickness sufficient to achieve the correct curing properties, SURFACE CURE A must be applied on to the substrate at the coverage rates recommended.