Description
A high quality 2 Pack epoxy floor coating system that is solvent free when used as a clear un-pigmented coating or binder. It consists of a Part A Resin and Part B Hardener.
Uses
- A heavy duty clear or pigmented coating for concrete andn polished concrete floors. Highly resistant to chemical attack and pedestrian or vehicular traffic.
- Can be used in conjunction with graded aggregates ton produce durable decorative floor finishes.
- FOR INTERIOR USE ONLY.
Advantages
- Long lasting and easily maintained with good resistancen to a wide range of domestic and commerial chemicals.
- Solvent free when used as a clear un-pigmented coatingn or binder.
- Outstanding water resistance.n Resistant to most chemicals.
Properties
Viscostity @ 25°C |
Low (<1,000 cps) |
Gel Time (@ 20°C, 65% R.H.) |
25-35 minutes |
Dust Free Time @ 20°C, 65% R.H). |
8 hours |
Cure Time (@ 20°C, 65% R.H.) |
Approx. 10-12 hours |
VOC Content: |
50 gms per litre Untinted 64 gms per litre |
(when mixed with Avista Internal Flooring Colour Tint)
Chemical properties
Resistant to a wide range of chemicals. Resistance to spillages (examples only).
- Toluene
- Acetic Acid 5%
- Sodium Hydroxide 30%
- Ammonia 20%
- Used sump oil
- Hydrochloric Acid
- Sulphuric Acid 30%
- Skydrol
- Sodium Chloride
- Kerosene
- Petrol
- Lactic Acid 5%
- C41 (Kodak) chemistry
- Ajax Liquid Gel (clear)
- Vegetable oils
Surface staining may result from exposure to some aggressive chemicals.
Good housekeeping practice requires spills to be quickly removed and washed.
Limitations
- Discolours after prolonged exposure to UV sunlight.
- Suitable for INDOOR USE ONLY.
- Prone to scratching. To reduce this, add SRA Slipn Reducing Additive or over-coat with Avista Polyurethane Sealer.
- Not recommended for use below 10°C or above 35°C.
- Ensure surface to be coated is dry. Moisture can causen blooming and delamination. Short pot life, approximately 25 minutes.
Application
NOTE: for Flake Flooring application instructions, see Avista Decorative Flake System TDS.